Decarbon Solvent

Premium Petrol Chemical Decoking and Injector Cleaning Solvent for use on Engines using Carburettors or Fuel Injection

Decarbon Premium Chemical Decoking and Injector Cleaning Solvent is a combustible non-flammable special blend of aromatic solvents and surfactants designed to remove gum varnish and soft to medium carbon deposits from fuel rails, injectors and combustion surfaces of petrol engines.

Decarbon Premium Chemical Decoking and Injector Cleaning Solvent will smooth rough idle, free sticking valves and sluggish compression rings, and purge excess deposits from fuel rails, injectors and combustion surfaces to restore power, performance, economy and reduce exhaust emissions.

Procedure for the use of Decarbon Premium Petrol Solvent:
1.  Mix 250ml of solvent with 750ml of clean petrol and add to your on-car cleaning machine.

2. Ensure engine is at operating temperature.

3. Connect on-car cleaning machine to fuel rail delivery line and to regulator return.  With engine stopped, flush the fuel rail for approx 10 to 15 minutes (this ensures dislodged deposits from the fuel rail and fuel regulator are not deposited into injectors).

4. Start engine and idle for approximately 15 minutes then stop engine and allow to soak for 15 minutes (this 15 minute soak period enablels the solvent mix to loosen deposits on combustion surfaces).

5. Start engine and delete solvent mix in machine.

6. Connect engine to vehicle fuel supply.

7.  Give a good hard road test while engine is still at operating temperature.

PRODUCT SPECIFICATIONS:

Boiling Point - 200 degrees C
Specific Gravity - 0.90 @ 200 C
Appearance - Light Brown Liquid
Mix Rate - 3/1 (250ml solvent to 750ml petrol)
Odour - Aromatic
Flash Point - 73 degrees C
Extinguishing Media - Foam, Dry Chemical CO2

Decarbon is available in a 5 litre container.